High-Pressure CO₂ – Industrial
Rapid, Powerful Fire Suppression for High-Risk Industrial Hazards
The Kidde Fire Systems High-Pressure (HP) CO₂ Fire Suppression System for industrial applications is engineered to provide fast, effective fire protection for demanding industrial applications involving flammable liquids, vapors, and deep-seated fire hazards.
Designed for challenging environments where rapid suppression is critical, the HP CO₂ system delivers carbon dioxide through a fixed piping network with specially designed discharge nozzles. When activated, the system releases CO₂ in seconds, quickly reducing oxygen levels and absorbing heat to extinguish fire.
Integrated with electric and/or pneumatic detection and control systems, the HP CO₂ Industrial system provides automatic, around-the-clock protection for high-risk operations.
Key Advantages
- Rapid Response – Discharges in Seconds
Designed to suppress fire quickly, reducing the potential for asset damage and operational disruption. - Effective for Surface and Deep-Seated Fires
Provides powerful suppression for a wide range of industrial hazard types. - Damage-Free Suppression
CO₂ is a clean, electrically non-conductive gas that dissipates naturally, minimizing residue and cleanup.
- Design Versatility
Available in three system configurations: Total Flooding, Local Application, Local Hose Line - Engineered for Industrial Applications
Designed specifically for industrial processes where flammable materials and vapors present ongoing risk.
Applications
The High-Pressure CO₂ – Industrial system is ideal for protecting a wide range of industrial hazards, including:
- Flammable liquid storage areas
- Quench and dip tanks
- Large commercial fryers
- Engine and electrical rooms
- Spray booths and paint lockers
- Turbine generators
- Printing presses
- Rolling mills
- Dust collectors
- Industrial ovens
- Mixing operations
The system supports both enclosed and partially enclosed hazards and can accommodate environments with continuous air handling processes.
System Architecture
Suppression Method
Carbon dioxide suppresses fire by:
- Absorbing heat from the fire
- Displacing oxygen to a level that will not support combustion
Because CO₂ is heavier than air, it forms a dense blanket over the hazard area during discharge.
System Configurations
The HP CO₂ – Industrial system is available in:
- Total Flooding – Designed for enclosed hazard areas.
- Local Application – Protects specific hazard zones in open areas.
- Local Hose Line – Provides cost-effective protection for targeted fire response.
Detection & Control Integration
- Utilizes electric and/or pneumatic detection units
- Control panel initiates automatic release upon detection
- Integrated with fixed piping network and engineered nozzle design
- Designed for automatic, 24-hour protection
When incorporated into a complete Kidde Fire Systems solution, HP CO₂ systems can operate as part of integrated detection-to-suppression architectures.
Installation & System Design
- Engineered specifically to the hazard and enclosure configuration
- Fixed piping distribution network
- Cylinders sized and arranged according to hazard requirements
- Designed in accordance with applicable codes and standards
- Supports centralized or distributed protection layouts
Technical Specifications
| PARAMETER | SPECIFICATION |
|---|---|
| System Type | High-Pressure Carbon Dioxide Fire Suppression |
| Suppression Method | Oxygen displacement and heat absorption |
| Discharge | Rapid release in seconds |
| Configurations | Total Flooding, Local Application, Local Hose Line |
| Typical Use | Industrial flammable liquid and vapor hazards |
| Integration | Engineered detection and control systems |
Compliance & Approvals
- UL Listed
- FM Approved
- USCG Approved
- Designed for installation in systems complying with applicable NFPA standards and AHJ requirements
Technical Documents
- Kidde Fire Systems High Pressure Carbon Dioxide – HPCO2 – Family DatasheetDownload PDF
Data Sheet · 14.0 MB
- Kidde Fire Systems HPCO2 – 123 lb CylinderDownload PDF
Data Sheet · 595 KB
- High-Pressure-CO2-Fire-Suppression-System_SS-K-106 (Spanish)Download PDF
Sell Sheet · ES · 469 KB
- Kidde HPCO2 High Pressure CO2 Fire Suppression SystemDownload PDF
A&E Specs · 188 KB
- KFS High-Pressure CO2 Fire-Suppression-System SSK 106Download PDF
Sell Sheet · 1.1 MB
- KF One Stop Solution Sell Sheet SSK-OSSDownload PDF
Sell Sheet · 1.8 MB
- KF Capabilities BrochureDownload PDF
Brochures · 5.5 MB
Powerful Suppression. Engineered Reliability.
The High-Pressure CO₂ – Industrial system delivers fast, dependable fire suppression for high-risk industrial environments, providing robust protection where flammable hazards demand rapid response.
Frequently asked questions
Where can I buy genuine High-Pressure CO₂ – Industrial in Vietnam?
High-Pressure CO₂ – Industrial is supplied in Vietnam by KiddeFenwal Vietnam with technical documentation, certificates and engineering support. Send a quotation request for a project-specific proposal.
Is original technical documentation available for High-Pressure CO₂ – Industrial?
Yes. Data sheets, design–installation–maintenance manuals and listings are in the Document Library; final specifications follow the latest KiddeFenwal data sheet.
How are price and lead time determined?
Fire protection systems are configured per project (protected area, standards, accessories), so pricing and lead time are quoted individually after the KiddeFenwal Vietnam engineering team reviews your requirements.
Need advice or a quote for this product?
KiddeFenwal Vietnam brings the full Kidde Fire Systems, Fenwal Controls and Kidde Fire Protection portfolio – fire detection, suppression and safety controls – to critical industries in Vietnam.